high performance and durability of the quick lift hand pallet truck

quick lift hand pallet truck are offering our clients an exclusive range of Hydraulic Drum Stacker. Extensively used for transporting and lifting material, these products are made using optimum quality raw material procured from the trusted vendors of the market in accordance to international quality standards. Being compatible in nature, these products are highly demanded in the market. These self propelled pallet truck are highly acclaimed by the clients for their precision designing, high performance and durability.

straddle semi electric stackers drive wheel speed reduction or drive motor serious overload is mainly because the battery voltage is too low or the pile head contact resistance is too large, cleaning the pile head can reduce the resistance, the battery voltage is low need to replace the new battery; commutator piece Caused by intercrystalline short circuit between the chip will cause this failure; cause this failure due to improper adjustment of the motor brake with the brake motor and drive head gear box and the lack of lubrication or bearing base block, the motor armature short circuit. To solve these problems: Clean the commutator, adjust the brake clearance, check the cleaning and re-fill the oil, remove the card group now and replace the motor.

The minimum turning radius of the high lifting stacker is the minimum turning radius of 90 degrees, the minimum turning radius of the stacker is one of the important performance parameters of the stacker, which determines how high the width of the stacker Channels and the workplace to the normal use. The smaller the turning radius of the stacker, the smaller the required channel width; so the same area of ​​the storage area will be able to pile up more things, greatly improving the utilization of the warehouse!

In general, the factors that determine the turning radius of the stacker are: front and rear wheelbase, left and right wheelbase, fork length, and the size of the object to be fork. Therefore, the normal situation is the manual stacker turning radius <light duty electric stacker turning radius <all electric forklift turning radius <forklift turning radius. Paddle-type stacker or van turning radius is generally the length of the front and rear wheelbase plus 0.3 meters.
Also involved in a "minimum channel diameter" is the electric stacker in the course of operations not only need to turn 90 °, but need to turn around in the channel 180 ° said the minimum distance required. Minimum channel diameter is a measure of the performance of a high-car through the main basis. In general the minimum diameter of the vehicle is 0.5 meters in length plus! Of course, it also depends on the use of what kind of pallets and cargo size!

Side of the drum semi electric stacker, forklift truck fork installed in the side, the side of the loading and unloading operations, mainly to solve the channel is too small occasions, the car is the general mode of production is a side shift installation, but the formal production is integrated side Move fork, the price is high. Domestic generally more than 200,000, imports are more expensive, need more than ten million dollars.
Advantages: suitable for narrow channel
Disadvantages: expensive, heavy body, poor mobility

mast reach stackers car is also called a very narrow roadway car, as the name suggests is that the car can be applied to the ultra-small channel stacking operation. Ordinary electric stacker generally need 2.3 meters above the channel space is better to operate, but this piled high car's unique shape makes it in the aisle space of 1.5 meters is still able to manipulate freely, showing that the efficiency of the warehouse for the use of the upgrade Great upgrade.
Pros: Powerful
Disadvantages: slightly more difficult to manipulate, the price super expensive

fork over stacker, the basic aspects of a similar weight and balance, no front legs with a counterweight, the difference is that the car fork and mast can move back and forth a certain distance, usually 550-650mm, so that , May be appropriate to shorten the length of the counter balance stackers, the channel requirements have a certain ease, the price balance is similar to the high heap cars.
Advantages: the use of a wide range of functions, powerful
Disadvantages: higher prices