1, the driver asked: the van must be operated by the personnel of the handling truck to operate, he can carry out the operation of the user on the operation and manipulation of goods demonstration, and can clearly guide the user how to operate the van.
2, the driver's rights, obligations and duties: the driver must be clear his rights and obligations, has been through the handling of vehicle training; also familiar with the contents of the operating instructions. If the van used is a walking control, the driver must wear safety boots while operating.
3, prohibit unauthorized use: the driver during the work of the van is responsible for, he must prevent unauthorized persons to drive or manipulate the van. It is strictly forbidden to transport or upgrade personnel by van.
4, failure and defects: van failure or defect must immediately notify the management staff. If the van can not be safely operated (eg wheel wear or brake failure), be sure to stop using it until they are completely repaired.
5, safe operation and environmental protection: inspection and maintenance operations of this chapter must be in accordance with the maintenance of the time interval on the implementation of the list. Can not easily change the parts on the truck, especially the safety device, the speed of operation of the vehicle must not be allowed to change. All original spare parts have been verified by the quality assurance department. To ensure the safety and reliability of the handling of the truck, it is recommended to use the spare parts of the manufacturer. Replacement parts such as oils and fuels must be disposed of in accordance with the appropriate environmental regulations.
6, Hazardous areas: electric reach stacker areas usually refer to the following areas: the transport vehicle or its load lifting device (such as fork or accessories) in the operation or lifting action on the risk of personnel, or ongoing transport load area. Usually this range extends to the area where the load falls or the vehicle attachment falls.
没有评论:
发表评论